- Cartridge Type: moving coil EIA mounting
- Cartridge Weight: 15.5g
- Source Impedance: 42 ohms
- Compliance: 5×10^-6 cm/dyne
- Output Voltage: 0.4mV/1kHz
- Tracking Force Range: 2.4 +0.0/-0.2g
- Frequency Response: 15 to 45kHz
- Channel Separation: >30db/1kHz
- Recommended Load: 100 – 250 ohms
- Double magnetic construction for field compensation
- Diamond Stylus: nude, cristaline-oriented diamond, 2 times very highly polished, biradial shape
- Damper: double silicon long life
Close
- Cartridge Type: moving coil EIA mounting
- Cartridge Weight: 27 grams
- Source Impedance: 45 ohms
- Compliance: 4×10^-6 cm/dyne
- Output Voltage: 0.42mV / 1kHz
- Tracking Force: 2.4 +0.0/-0.3gramms
- Frequency Response: 15 to 45kHz
- Channel Separation: >35db/1kHz
- Recommended Load: 100-500 Ohms
- Double magnetic construction for field compensation
- Cryogenic treated armatures
- Diamond Stylus: nude, cristaline-oriented diamond, 2 times very highly polished, biradial shape
- Damper: double silicon long life
Close
- Cartridge Type: moving coil EIA mounting
- Cartridge Weight: 14g
- Source Impedance: 42 ohms
- Compliance: 6×10^-6 cm/dyne
- Output Voltage: 0.38mV/1kHz
- Tracking Force Range: 2.4 +0.1/-0.2g
- Frequency Response: 15 to 40kHz
- Channel Separation: >28db/1kHz
- Recommended Load: 80 – 250 ohms
- Diamond Stylus: nude, cristaline-oriented diamond, 2 times very highly polished, biradial shape
- Damper: double silicon long life
Close
- Amplifier Unit: Solid state moving coil output to line level input amplifier with RIAA equalisation
- Equalisation: RIAA equalised record will give flat output +/1db between 20-20kHz
- Subsonic Filter: yes, below 5Hz
- Bandwith: 2Hz to 50kHz internally limited
- Input: impedance / cartridge load: does automatically match to cartridge if source impedance is between 2 to 100 Ohms
- Gain: depending on source impedance of cartridge, typical 60 to 65db
- Recommended Cartridges: Impedance from 2 to 80 Ohms, output 0.25 to 0.6mV / 1kHz output
Close
